RH Series
  
Type No.
TF
Cut-off
Temp.
TH/TC
TM/Tm
Ir
Ur
Safety Standard
( Approved Applying )
CCC
RH95
98oC
932oC
68oC
180oC
2A
250V
RH102
102oC
982oC
76oC
180oC
2A
250V
RH115
115oC
1113oC
85oC
180oC
2A
250V
RH125
125oC
1222oC
97oC
180oC
2A
250V
RH130
130oC
1262oC
102oC
180oC
2A
250V
RH135
135oC
1313oC
105oC
180oC
2A
250V
RH138
138oC
1352oC
108oC
180oC
2A
250V
RH145
145oC
1422oC
110oC
180oC
2A
250V
RH150
150oC
1452oC
115oC
180oC
2A
250V

Pic and Size

產品實物放大圖


Size:G(mm))
 
a
b
c
d
e
6.20.5
6.30.5
2.50.3
0.540.02
703

EXPLANATION OF TECHNICAL TERMS
TF - Rated functioning temperature: The temperature at which a Thermal Cutoff changes its state of conductivity to open circuit detection current.The tolerance according to IEC691 is from +0 to -10degree.(With Japan Electrical Appliance and Material Law, on the other hand, they must function in the tolerance range of +/-7degree C.).
Fusing(Cut)-off temperature: The Fusing-off temperature indicates value measured in silicon oil with a temperature increased by 0.5-1degree per minute and a detective current 100mA or less.
TH/TC-Holding temperature: The maximum temperature at which a thermal Cutoff will not cause a change in state of conductivity to open circuit while conducting rated current for 168 hours.this rating is required by safety standards based on IEC691.
TM/Tm - Maximum temperature limit: The maximum temperature at which a Thermal Cutoff can be maintained for 10 minutes without reclosing.This rating is required by safety standards based on IEC691
Ir - Rated current: The allowable maximum current which a Thermal Cutoff is able to carry
Ur - Rated voltage: The allowable maximum voltage which a Thermal Cutoff is able to be applied.

BACK

© 2017 Cotech Electronics Co., Ltd. All Rights Reserved